Epson C850071 - RIP Station 5000 User Manual page 10

T
O CONFIGURE THE CONNECTION FOR
1. Launch Fiery Spooler by double-clicking its icon or by choosing it from the Start\Programs
menu.
2. Click OK.
3. Enter the appropriate information for the RIP Station.
—Enter the Server Name of the RIP Station as it was defined during Server
Server Name
Setup.
—Enter the IPX Address of the RIP Station.
IPX Address
—Enter the name of the device that the RIP Station is connected to: Pro5000.
New Device
This device name appears in the Printer Setup section of the Configuration page.
4. When you have entered all the information, click Add.
5. With the device name (Pro5000) selected in the Devices list, click OK.
The RIP Station appears in a list of available servers.
6. With the RIP Station selected in the list of available servers, click OK to begin using
Fiery Spooler.
T F S
O MODIFY THE IERY POOLER CONFIGURATION
1. In the Chooser dialog box, click Configure.
2. To edit information for a RIP Station, select the RIP Station by its Server Name and click
Modify. Edit information in the Settings dialog box as necessary, and click OK when
finished.
3. To add a new RIP Station, click Add. Configure the Settings dialog box as outlined in step 3
through step 5 above.
4. To remove a RIP Station, select the RIP Station by its Server Name, click Remove, then click
Yes in the Remove dialog box.
5. Click Close in the Configure dialog box.
The list of available servers reflects the modifications you have made.
F S :
IERY POOLER
:
Page 10