Epson C850071 - RIP Station 5000 User Manual page 25

RIP area
The job icon in the RIP area is described below:
RIP area icon:
Raster data headed for
turn
White printer icon
After a job is rasterized, it goes into the RIP area. The RIP area holds only raster data (i.e.,
jobs that have been rasterized). Jobs in the RIP area are waiting for the printer to be free.
Raster jobs in the RIP area that are waiting to print cannot be manipulated by job
N :
OTE
commands.
Print area
The job icon in the Print area is described below:
Print area icon:
PostScript data only—raster data
has been deleted
White PS icon
The Print area, also referred to as the Printed queue, contains jobs that have already been
printed.
A job row that appears in light red indicates that a PostScript error occurred while
N :
OTE
printing the job. To see the error, double-click anywhere in the row.
Newly printed jobs are added to the Printed queue, and are shown at the top of the list. Jobs
are saved in the Printed queue until the job limit is reached. When the first job over the
limit is printed, the oldest job is deleted from the disk. The default job limit is 10 jobs. The
value for J obs Saved in Printed Queue can be changed in Setup by the administrator.
If you reprint a job in the Printed queue, the job returns to its original position in
N :
OTE
the Printed queue after it is printed.
While it is printing, a job consists of PostScript and raster data; jobs with only PostScript
data remaining are represented by a white PS icon.
What it indicates:
in its
Print
What it indicates:
Page 25
How long you see the job:
Until printer is free to print the
job
How long you see the job:
Until the job limit is reached