Printer Setup - Epson C850071 - RIP Station 5000 User Manual

Page 57

Printer Setup

From this window, you can access two tabs: Printer Setup, and Color and Paper Setup.
T :
O SET PRINTER OPTIONS
• Click the Printer Setup tab.
Printer Setup
—Specify the device name of the printer whose connections and protocols
Select Printer
you want to configure.
—Specify the model of the printer connected to the RIP Station.
Printer Type
—Select to enable users to print (or download) jobs to the
Publish Direct Connection
RIP Station without spooling. When the Direct connection is published, users can print
jobs to the Direct connection and download and delete printer fonts. Jobs printed to the
Direct connection are not available to be reprinted from the Printed queue.
The Direct connection must be published to download fonts.
N :
OTE
—Select to enable users to print jobs to the Hold queue. Jobs printed to
Publish Hold Queue
the Hold queue are not processed until the administrator releases them for printing from
Fiery Spooler or WebSpooler. To enable Fiery utilities, you must publish the Hold queue,
regardless of whether users send jobs to the Hold queue.
—Select to enable users to print jobs to the Print queue. Jobs printed to
Publish Print Queue
the Print queue are spooled on the RIP Station disk.
—This option is available only if the parallel port has been enabled and
Parallel Connection
you have published one or more print connections (Print queue, Hold queue, or Direct
connection). This setting determines where jobs printed to the parallel port are sent. If only
one queue has been published, parallel port jobs are automatically printed to that print con-
nection.