Epson C850071 - RIP Station 5000 User Manual page 16

B :
EFORE YOU BEGIN
Print the Configuration page from the Control Panel and note the IP Address of the
RIP Station.
You can also set up a Domain Name Server (DNS) for the IP address of the RIP Station in
the HOSTS file and use that name. See your Windows system documentation for
information.
T
O CONFIGURE THE CONNECTION TO THE
1. Launch ColorWise Pro Tools by double-clicking its icon (Mac OS and Windows) or by
choosing it from the Start>Programs>Fiery menu (Windows).
The Choose Printer Device dialog box appears.
2. If you have previously configured a Windows connection to the RIP Station, then you are
ready to use ColorWise Pro Tools. See "Using ColorWise Pro Tools" on page 29.
If you have not previously configured a connection, click Add.
3. Enter the appropriate information for the RIP Station.
—Enter a name for the RIP Station. This name can be any name you wish; it
Nickname
does not have to match the actual Server Name of the RIP Station.
The Nickname cannot contain any of the following seven characters:
N :
OTE
[ ] _ " ' <space> <tab>
—Choose the type of network protocol you are using from the pop-up menu.
Protocol
ColorWise Pro Tools software is supported only with TCP/IP, so no choice is
N :
OTE
necessary.
—Enter the IP address (or DNS or hosts name) of the RIP Station.
Server Name
—(This area is not enabled for ColorWise Pro Tools.)
IPX Address
RIP S :
TATION
Page 16