Fans 4 And 5 - Compaq 222863-001 - TaskSmart W2200 Model 10 Maintenance And Service Manual

2-34 Compaq TaskSmart W2200 Appliance Server Maintenance and Service Guide

Fans 4 and 5

To remove fan 5:
1. Power down the server. See "Powering Down the Server" earlier in this chapter.
2. Remove the access panel. See "Access Panel" earlier in this chapter.
3. Disconnect the fan cable from the fan connector on the system board
4. Remove the two Phillips-head screws that secure the fan in the chassis
5. Lift and remove the fan
Figure 2-29. Removing fan 5 from the server
6. Repeat steps 2 through 5 to remove fan 4, if needed.
To replace fans 4 and 5, reverse steps 2 through 6.
.

3
1
2



2
.
.