Center Wall - Compaq 222863-001 - TaskSmart W2200 Model 10 Maintenance And Service Manual

2-26 Compaq TaskSmart W2200 Appliance Server Maintenance and Service Guide

Center Wall

To remove the center wall:
1. Power down the server. See "Powering Down the Server" earlier in this chapter.
2. Remove the access panel. See "Access Panel" earlier in this chapter.
3. Remove the PCI riser board assembly. See "PCI Riser Board Assembly" earlier in this
chapter.
4. Disconnect the center wall fan cables from the fan connectors on the system board
5. Loosen the center wall thumbscrew
2
Figure 2-21. Disconnecting the center wall fan cables and loosening the thumbscrew (processor
removed for clarity)
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before touching them.
1
.

1
1
.