System Switch (Sw2); System Configuration Switch (Sw3) - Compaq 222863-001 - TaskSmart W2200 Model 10 Maintenance And Service Manual

4-6 Compaq TaskSmart W2200 Appliance Server Maintenance and Service Guide

System Switch (SW2)

The system switch (SW2) is a four-position switch used for performing recovery and other
diagnostic operations as shown in Table 4-5.
Switch Position
Note: "On" activates the function.

System Configuration Switch (SW3)

The system configuration switch (SW3) is an eight-position switch used for system
configuration as shown in Table 4-6.
Switch Position
Note: "On" activates the function.
CAUTION: System switch settings are to be adjusted only by a Compaq certified technician.
CAUTION: Clearing CMOS or nonvolatile RAM (NVRAM) deletes your configuration information.
Refer to the Compaq TaskSmart W2200 Appliance Server Administration Guide for complete
instructions on configuring your appliance server.
System Switch (SW2) Settings
Function
S1 Clear password
S2 Clear CMOS
S3 Factory default
S4 Factory default
CAUTION: System configuration switch settings are to be adjusted only by a Compaq certified
technician.
System Configuration Switch (SW3) Settings
Function
S1 VGA disable
S2 Factory default
S3 Factory default
S4 Factory default
S5 Factory default
S6 Factory default
S7 Factory default
S8 Factory default
Table 4-5
Table 4-6