Removal And Replacement Procedures; Electrostatic Discharge Information - Compaq 222863-001 - TaskSmart W2200 Model 10 Maintenance And Service Manual

This chapter provides subassembly and module-level removal and replacement procedures for
the Compaq TaskSmart W2200 appliance server. After completing all necessary removal and
replacement procedures, run the diagnostics utility to verify that all components properly
operate.
To service the TaskSmart W2200 appliance server, you may need the following tools:
Phillips screwdriver
Shipping/ejector key
Diagnostics software

Electrostatic Discharge Information

A discharge of static electricity can damage static-sensitive devices or microcircuitry. Proper
packaging and grounding techniques are required to prevent damage. To prevent electrostatic
discharge (ESD) damage, observe the following precautions:
Transport products in static-safe containers such as conductive tubes, bags, or boxes.
Keep electrostatic-sensitive parts in their containers until they arrive at static-free stations.
Cover workstations with approved static-dissipating material. Use a wrist strap connected
to the work surface as well as properly grounded (earthed) tools and equipment.
Keep the work area free of nonconductive materials such as ordinary plastic assembly aids
and foam packing.
Ensure proper grounding before touching a static-sensitive component or assembly.
Avoid touching pins, leads, or circuitry.
Place drives printed circuit board (PCB) assembly-side down on any surface.
Use conductive field service tools.

Removal and Replacement Procedures

2
Chapter