Table of Contents
Advertisement
AAM6030VI 802.11g WLAN 4-port ADSL Combo Router User's Manual
3.2.6
Windows® NT 4.0 workstations:
1. In the Windows NT task bar, click the Start button, point to Settings, and then click Control
Panel.
2. In the Control Panel window, double click the Network icon.
3. In the Network dialog box, click the Protocols tab.
The Protocols tab displays a list of currently installed network protocols. If the list includes TCP/IP,
the protocol has already been enabled. Please skip to step 9 directly.
4. If TCP/IP does not display as an installed component, click
5. In the Select Network Protocol dialog box, select TCP/IP, and then click
You may be prompted to install files from your Windows NT installation CD or other media. Follow
the instructions to install the files.
After all files are installed, a window displays to inform you that a TCP/IP service called DHCP can
be set up to dynamically assign IP information.
6. Click
7. After restarting your PC, open the Control Panel window, and then double-click the Network
icon.
8. In the Network dialog box, click the Protocols tab.
9. In the Protocols tab, select TCP/IP, and then click
10. In the Microsoft TCP/IP Properties dialog box, click the radio button labeled Use the
following IP address and type 192.168.1.x and 255.255.255.0 in the IP address field and
Subnet Mask field, respectively.
11. Click
3.2.7
Assigning IP to your PC automatically by DHCP
In some cases, you may want to adapt AAM6030VI's DHCP feature (it's only available in router mode)
to your PC, you just click the radio button labeled Obtain an IP address automatically instead of Use
the following IP address in above steps.
By default, the LAN port IP address of AAM6030VI is assigned as: 192.168.1.1. (You can change
this number, or another number can be assigned by your ISP. See Chapter 6 for more
information.)
Note
3.3
Login to your AAM6030VI
In this section, you can login to the AAM6030VI's Web page, either by an Ethernet or a USB cable, and
start to configure settings and observe some statistics of your Internet connection.
1. Open your Web browser, and type the following URL in the address/location box, and press
<Enter>:
http://192.168.1.1
This is the predefined IP address for the LAN port on the AAM6030VI.
to continue, and then click
twice to confirm and save your changes, and then close the Control Panel.
Your PC must have IP addresses that place them in the same
subnet as the AAM6030VI's LAN port. If you manually assign IP
information to your AAM6030VI, you can follow the instructions in
section "6.2 LAN" to change the LAN port IP address accordingly.
.
if prompted to restart your computer.
.
.
23
Advertisement
Table of Contents
