AAM6000EV-M ADSL Combo Router User's Manual
6.3
NAT
Click the sub-menu "NAT" of "Advanced Setup", you may start to configure the NAT features
below:
1. Virtual Servers: You may click
POP3, FTP & Web etc., and related Protocol (TCP/UDP, TCP or UDP), external/internal port
and Internal server IP address (Figure 6.8 and 6.9). Click
effective.
2. Port Triggering: You may click
incoming port range, outgoing protocol, outgoing port range and click
packets for this application to the specified ports (Figure 6.10 and 6.11).
36
to select proper service names, like Telnet, DNS, IPSec,
Figure 6.8 NAT Virtual Server Page 1
Figure 6.9 NAT Virtual Server Page 2
to enter the application name, incoming protocol,
to make these parameters
to forward IP