Critical Updates That Require A Restart; Configuring Date And Time Service - NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance
3. After the update has finished, click Apply to activate the newly updated software.

Critical Updates That Require a Restart

If a downloaded update requires a restart, you are prompted to perform the update when you
log in to the STM. The following figure shows an example of a Critical Update screen, which
provides information about the update and allows you to install it immediately or at sa later
time. To install the update immediately, click Install Now. To install the update at a later time,
click Later.
Figure 44.

Configuring Date and Time Service

If you have used the Setup Wizard, you might have already configured the system date and
time settings; the System Date and Time screen allows you to modify these settings.
Configure date, time, and NTP server designations on the System Date and Time screen.
Network Time Protocol (NTP) is a protocol that is used to synchronize computer clock times
in a network of computers. Setting the correct system time and time zone ensures that the
date and time recorded in the STM logs and reports are accurate. Changing the time zone
requires the STM to restart to apply the updated settings.
74 | Chapter 3. Performing Network and System Management