Generating Reports For Downloading - NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual

Generating Reports for Downloading

To generate a report:
1. Select Monitoring > Reports from the menu. The Reports screen displays. By default,
the Generate Report radio button is selected. The following figure shows the Reports
screen without the Template Reports section, and shows some samples in the
Generated Report List.
For information about report templates, see the Report Templates section.
Figure 113.
2. In the Filtering Options section of the screen, make your selections from the Time Range
drop-down lists. Specify a start date and time and an end date and time. For advanced
filtering options, see
3. In the Report Templates section of the screen, select the check boxes for the reports that
you want to generate. For information, see
Report Templates.
4. In the Generate Report section of the screen, click Generate. After a short while, the report
is added to the Generated Report List. This list can contain a maximum of 12 saved reports.
(To delete a previously saved report, click its Delete table button in the Action column.)
5. Download the new report (or a previously saved report) by clicking its Download table
button in the Action column.
The report is downloaded as a zipped file. By default, the zipped file contains MHTML
files. However, you can change the output format from the Output Format drop-down list
202 | Chapter 6. Monitoring System Access and Performance
ProSecure Web/Email Security Threat Management (STM) Appliance
Advanced Report Filtering Options
Report Templates
on page 204.
on page 200 and Appendix A,