Hardware Features; Front Panel Ports And Leds - NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual

• ProSecure™ Web/Email Security Threat Management Applliance STM150, STM300, or
STM600 Installation Guide
• Depending on the model purchased, service registration card with one or more license
keys
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep
the carton, including the original packing materials, in case you need to return the product for
repair.

Hardware Features

The front panel ports and LEDs, rear panel ports, and bottom label of the STM models are
described in this section.

Front Panel Ports and LEDs

The front panels of the three STM models provide different components.
STM150 Front Panel
The following figure shows the front panel ports and status light-emitting diodes (LEDs) of the
STM150:
1) Power LED
2) Test LED
Figure 2.
From left to right, the STM150's front panel shows the following ports and LEDs:
1. Power LED.
2. Test LED.
3. One nonfunctioning USB port. This port is included for future management enhancements.
The port is currently not operable on any STM model.
4. One uplink (WAN) Gigabit Ethernet port with an RJ-45 connector, left LED, and right LED.
5. Four downlink (LAN) Gigabit Ethernet ports with RJ-45 connectors, left LEDs, and right
LEDs.
14 | Chapter 1. Introduction
ProSecure Web/Email Security Threat Management (STM) Appliance
4) Uplink LEDs
3) USB port
4) Uplink port
5) Downlink LEDs
5) Downlink ports