Pci Slots Configuration Sub-Menu; Remote Access Configuration Sub-Menu - LaCie 12big Rack Storage Server User Manual

LaCie 12big Rack Storage Server
User Manual
6.3.7.

PCI Slots Configuration Sub-Menu

Table 34 - PCI Slots Configuration Sub-Menu
Feature
Expansion ROM on PCI Slot 1
Expansion ROM on PCI Slot 2
Expansion ROM on PCI Slot 3
Expansion ROM on PCI Slot 4
Expansion ROM on PCI Slot 5
Expansion ROM on PCI Slot 6
Expansion ROM on PCI Slot 7
6.3.8.

Remote Access Configuration Sub-Menu

Table 35 - Remote Access Configuration Sub-Menu
Feature
Remote Access
Serial port number
Base Address, IRQ
Serial Port Mode
Flow Control
Redirection After BIOS POST
Options Description
Enabled
✦
✦ Disabled
Options Description
Enabled Configures console redirection. Disabling remote ac-
✦
cess will hide all related features in this sub-menu.
✦ Disabled
COM1 Configures serial port for console redirection. Also
✦
used for Headless operation mode through ACPI.
✦ COM2
IO, IRQ Displays the hardware address of the COM port used
for the console.
115200 8,n,1 Configures the serial Baud rate for the serial ports.
✦
8 data bits, no parity and 1 stop bit parameters are
✦ 57600 8,n,1
fixed.
✦ 38400 8,n,1
✦ 19200 8,n,1
✦ 09600 8,n,1
✦ Hardware Configures flow control for console redirection for
both serial ports.
✦ Software
None
✦
✦ Disabled Selects how the serial redirection done by the BIOS
will operate after the POST.
✦ Boot loader
Always
✦
BIOS Settings
page 41
Setup Help
Enabled: Loads Expansion
ROM on PCI Slot. Disabled:
Expansion ROM on PCI Slot
not loaded.
Setup Help
Make sure the selected port is
enabled.
Disable: Turns off the redirec-
tion after POST Boot Loader:
Redirection is active during
POST and during Boot Load-
er. Always: Redirection is al-
ways active. (Some OSs may
not work if set to Always) [En-
abled] - keep it [Disabled]-
deactivate