The Management Gui; Connecting To The Web Management Interface; System; Information - LaCie 12big Rack Storage Server User Manual

LaCie 12big Rack Storage Server
User Manual

5. The Management GUI

5.1. Connecting to the Web
Management Interface
Before connecting to the management GUI, the baseboard man-
agement IP address needs to be confirmed. To obtain the address
or configure it:
1. Enter the BIOS setup.
2. Go to Set LAN configuration menu, which is located under "Sys-
tem Management".
3. Set LAN channel IP Address source, IP Address, MAC address,
Subnet Mask and (if required) the Gateway address on the cor-
responding menu.
4. To enable the settings, select "Enable Channel".
To access the Web Management Interface:
1. Open a web browser.
2. Type the IP address of the management controller in the brows-
er.
3. The default user name and password are "admin" and "admin".
NOTE: A maximum of 5 users can be connected simultaneously.
Users will be logged out automatically after 300 seconds of inactiv-
ity.

5.2. System

5.2.1.

Information

Once connected to the Web Management Interface, the first page
seen is the System Information. All board information is displayed
on this page.
5.2.2.

Event Log

On the left column, the Event Log section can be selected by click-
ing on the corresponding text. In this section the System Event Log
(SEL) information and the event list are shown. A maximum of 1023
events can be displayed; the older ones will be removed when there
are more than 1023. Use the arrows at the bottom of the table to
browse events. They can be cleared or refreshed manually.
The Management GUI
page 24