Class 1 Laser Product. The LaCie 12big Rack Fibre 8 RAID Controller is supplied with optical SFP Transceiver modules. They contain a laser that complies with Laser Class 1, US 21 CFR (J) & EN 60825-1, UL (NRTL) and TUV.
LaCie 12big Rack Fibre 8 Preparation Quick Install Guide page 4 Preparation wish to contact the shipping company if there is apparent damage. Open the carton top, and remove the accessory kit box. Lift the top foam component of the packaging from the enclosure.
Figure 2: Removing PCMs and Disk Drives Rack Installation Figure 3: Securing Chassis Slides to Enclosure 3.1. Rack Installation Prerequisites The LaCie 12big Rack Fibre 8 and LaCie 12big Rack Fibre 8 enclosures are designed for installation into an industry standard 19-inch cabinet.
LaCie 12big Rack Fibre 8 Rack Installation/Setup and Cabling Quick Install Guide page 6 Assemble the rack brackets to the rack posts as follows. fasteners on the front flanges (located just outside The bracketsare universal and will fit either side.
LaCie 12big Rack Fibre 8 Setup and Cabling Quick Install Guide page 7 4.2. Cabling the Enclosures Figures 7 through 14 depict the supported cabling configurations. Locate the figure that depicts your configuration and Cabling Multiple Enclosures. Figure 10: Dual Hosts, Single HBAs, and Dual Controller Cabling...
Dual Controller Cabling 4.4. Connecting the Power Cords For more details refer to the LaCie 12big Rack Fibre 8 User Guide, as well as the StorView Storage Management Software and Powering On the System RAID Module User Guide and the VT-100 RAID Configuration Utility User Guide.
Page 11
LaCie Italy LaCie United Kingdom 25/F Winsan Tower Milano Business Park and Ireland 98 Thomson Road Via dei Missaglia 97 LaCie Ltd, Power Road Studios Wanchai, Hong-Kong, China 20142 Milano 114 Power Road info.asia@lacie.com info.it@lacie.com Chiswick, London, UK W4 5PY UK: info.uk@lacie.com...
Need help?
Do you have a question about the 12big rack fibre 8 and is the answer not in the manual?
Questions and answers