HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 61

3. In the config folder, locate the
Note
4. Enter new settings by editing each parameter in the file.
5. To activate the new settings it will be necessary to restart the
6. Save the file. Saving the file sends the new settings to the
CAUTION
using the Windows Notepad editor or any other editor. In a
standard Explorer setup, double clicking an '.ini' file will
automatically open the file with the Notepad editor. An
example is shown below.
See appendix B for a list of the config.ini file's contents.
The configuration file illustrated above is for version 4.11 of
the HP CD-ROM Server firmware. As firmware updates
become available, the configuration files may change. Refer
to appendix C for more information.
Further explanation of the parameters is available in
appendix B "The Config.ini File".
CD-ROM server. This can be done by setting the
parameter to
yes.
save the file.
CD-ROM server. If you have set the
the server will restart and the indicators will flash during the
self-test. When the STATUS indicator stops flashing and
remains off, the server is ready for use with the new settings.
When editing the file, be sure that there is a space between
the equal sign and the parameter value.
Do not remove the
config.ini
The CD-ROM server will restart when you
Restart
marker from the file.
[END]
CD-ROM Server Configuration 5-5
file. Open the file
Restart
parameter to ,
yes