HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 41

9. Select a drive letter for your CD-ROM server.
10. Check Reconnect at logon if you wish to use the CD-ROM
11. Click the OK button. The CD-ROM server is ready for use.
Windows for
1. Start the File Manager.
Workgroups
2. From the Disk menu, select Connect Network Drive... The
3. Click the Select NetWare Connection button on the toolbar.
4. Select the entry for your new CD-ROM server. The default
5. Click the Login button.
6. If you are using Bindery mode you will be prompted to enter
server under the same drive letter the next time you start your
computer.
following screen is displayed. If you also have Microsoft
Network installed, you may have to click the button labelled
'NetWare...' to display the screen.
name is
HP hhhhhh _NW
the CD-ROM server LAN hardware (MAC) address.
your user name and password, unless you are already logged
in. Before the CD-ROM server has been set up, all users have
full access to it.
, where are the last six digits of
hhhhhh
Mounting or Mapping Network Drives 4-9