Configuration Setup
4. Power on the Windows-based PC and wait until the operating system has
5. Insert the RapidLaunch CD into the DVD-ROM drive of the Windows-based
6. The RapidLaunch CD should automatically run. If the program does not start
7. Go to the NAS device and power it on. It will be several minutes before the
8. Return to the Windows-based PC. Select StorageWorks NAS from the Show
Note:
not configured for use.
40
completely loaded.
PC.
up automatically, the program may be run manually. Click Start, and then
select Run on the Windows taskbar, and then type the following:
{CD ROM drive}:\setup.exe
Wait for the interface to start up.
NAS device is accessible on the network.
drop down list to have RapidLaunch list all NAS devices on the network, as
shown in
Figure
7.
Connect a loopback cable to any of the NAS b3000 v2 Ethernet ports that are
NAS b3000 v2 Quick Start Guide