Cisco N5K-M1600 - Expansion Module - 6 Ports Troubleshooting Manual page 141

Chapter 7 Troubleshooting System Management Issues
S e n d d o c u m e n t c o m m e n t s t o n e x u s 5 k - d o c f e e d b a c k @ c i s c o . c o m .
•
•
•
•
•
•
•
•
•
Specified domain not removed from domain-list
When using the no ip domain-list <name> command to remove a specified domain from the
domain-list, only the most recently added domain is removed.
Possible Cause
The no ip domain-list <name> command is not locating the specified domain.
Solution
There are two possible workarounds:
•
•
OL-25300-01
config t
vrf context management
ip host name <address1 [address2... address6]>
ip domain-name name [use-vrf <vrf-name>]
ip domain-list name [use-vrf <vrf-name>]
ip name-server <server-address1 [server-address2... server-address6]>< [use-vrf vrf-name>]
ip domain lookup
show hosts
copy running-config startup-config
To remove a domain using the no ip domain-list <name> command that is not the most recently
added domain to the domain-list, you must temporarily remove every domain in the domain-list until
reaching the desired domain. Then you must add back the temporarily removed domains to the
domain-list.
An alternative approach is to copy the startup-config and delete the desired domain with a text editor.
Then you must load the edited startup-config back onto the device.
Cisco Nexus 5000 Series Troubleshooting Guide
DNS
7-5