Table of Contents
Advertisement
Basic Troubleshooting
If you cannot link to your switch, try the following suggestions:
•
Check the LED lights on the adapter. If the LINK light is not on,
check all connections to the adapter and link partner. Make sure the
link partner is not set to match the adapter (preferably set to auto
negotiation enabled) and the driver is loaded.
•
Make sure the cable is installed properly. The network cable must be
securely attached at all connections. If the cable is attached, but the
problem persists, try a different cable.
•
Check the Troubleshooting section of the User Configuration Guide
for more information. If an issue continues or is not addressed here,
see the Late-breaking News document on the Intel
Storage Adapter CD or check out the Intel support Web site at
http://support.intel.com.
20
®
PRO/1000 T IP
Advertisement
Table of Contents
Need help?
Do you have a question about the PRO1000 - MT Dual Port Server Adapter and is the answer not in the manual?
Questions and answers