Advertisement
Advertisement
Table of Contents
Related Manuals for Maytag MLG2000AWW
Summarization of Contents
Tools and Items Provided
Tools Needed for Installation
Lists the necessary tools for installing the stacked washer/dryer.
Items Provided
Lists the items included with the appliance for installation.
Local Considerations and Exhausting
Local Considerations
Discusses room requirements, clearances to combustibles, and air flow for proper operation.
Exhausting
Details mandatory outdoor exhausting and warnings against using plastic or nonmetal flexible duct.
Washer Requirements
Drain Facility
Specifies requirements for the drain hose and standpipe height for proper drainage.
Flooring
Recommendations for installing the washer on a stable and solid floor.
Location Considerations
Advice on installing the washer in areas that avoid freezing temperatures.
Gas Requirements
Gas Ignition
Information on the dryer's automatic ignition system, no constant pilot.
Grounding
Safety instructions and requirements for proper grounding of the appliance.
Electrical Requirements
Grounding
Importance of grounding and proper connection procedures for electrical safety.
Gas Models
Specific electrical considerations for gas models.
Electric Models
Specific electrical considerations for electric models.
Electrical Connections
Step-by-step guide for making electrical connections.
Gas Models – U.S. and Canada
Electrical supply requirements for gas models in the US and Canada.
Electric Model Specifics and Export Instructions
Electric Models – U.S. and Canada
Electrical requirements for U.S. and Canadian electric models.
U.S. Electric Models
Details on power cord and wiring for U.S. electric models.
120/208 Volt Electrical Systems
Information on converting for 120/208 volt systems.
Canadian Electric Models
Notes on electric models shipped with power cords in Canada.
Additional Instructions for Export Models
Specific guidance for models not sold in the U.S. or Canada.
Export Electric Models
Electrical requirements for export electric models.
Installation Steps
Removing Packaging and Shipping Restraints
Instructions for carefully removing packaging and shipping restraints.
Positioning the Appliance
Guidance on tipping the appliance and removing the crate bottom.
Adjusting Leveling Legs
Instructions for loosening and adjusting the washer's leveling legs.
Securing Shipping Straps
How to carefully cut away shipping straps at the back of the washer.
Connecting Drain Hose
Instructions for placing the drain hose and securing it.
Connecting Water Inlet Hoses
Steps for attaching inlet hoses with screen strainers to faucets.
Leveling the Appliance
Procedure for leveling the machine on all four sides.
Gas Dryer Connections
Gas Pipe Connection
Details on applying joint compound, Teflon tape, and connecting the gas pipe.
Checking for Gas Leaks
Instructions on how to check gas supply connections for leaks.
Electrical Connections for U.S. Dryers
3-Wire System Connections
Guide for connecting the power cord using a 3-wire system.
4-Wire System Connections
Guide for connecting the power cord using a 4-wire system.
Wire and Ground System Connections
2-Wire and Ground System Connections
Instructions for connecting the power cord using a 2-wire and ground system.
Export Gas Models
Information on electrical and gas conversion for export gas models.
Door Reversal Instructions
Reversing the Dryer Door
Step-by-step guide to reverse the direction of the dryer door swing.
Reversing the Washer Door
Step-by-step guide to reverse the direction of the washer door swing.
Final Installation Checklist and Testing
Final Installation Checklist
A list of items to check before operating the appliance.
Test for Proper Operation
Instructions for running a complete wash cycle to test functionality.
Need help?
Do you have a question about the MLG2000AWW and is the answer not in the manual?
Questions and answers