U82S Example Project - Recording A Guitar; Install Drivers, Control Software, And Cubase ® Le 4; Activate Cubase Le 4 - Lexicon I-ONIX U82S Owner's Manual

eLicense Number
10

u82S example Project - recording a Guitar

Follow the steps in this example to start using the U82S and become famil-
iar with it. This example uses Cubase
DAW applications.
Install Drivers, Control Software, and Cubase
1. Insert the DVD into your DVD-ROM drive. The Installer should start
automatically.
If the Installer doesn't start automatically, you can start it manually by
opening the approprate file on the DVD:
Mac
Windows
2. Once the Installer is open, follow the on-screen instructions to install
the software you wish to use.
Note: You must install the I•ONIX U82S Drivers to use the U82S
with Cubase
steps in the example project on the following pages.
The latest drivers can also be downloaded from www.lexiconpro.com.

Activate Cubase LE 4

1. Install Cubase LE 4.
2. Start Cubase LE 4 and click Register Now or go to www.steinberg.net/
(20 characters)
en/mysteinberg
3. Create a MySteinberg account (follow onscreen instructions) and log
onto MySteinberg.
4. Click Cubase LE 4 in the Activation & Reactivation section then click
More in the Permanent Activation section.
5. Type in your Soft-eLicense Number (Sel Nr.). This number can be
found in the following locations:
Windows: Start > All Programs > Syncrosoft > License Control Center.
Mac: Applications > License Control Center.
6. Select Lexicon in the Hardware Manufacturer field and click Request
Activation Code.
7. Copy your Activation code.
8. Go back to the License Control Center window (where you found the
Activation code
(32 characters)
eLicense Number) and click Wizards > License Download.
9. Click Next then paste or manually enter the Activation Code. Click
Enter, Next, then Start.
Once the license has been downloaded, click OK then Finish.
: Open Me
®
® : InstallationMenu.exe
® LE 4. You must also install Cubase LE 4 to follow the
LE 4, but the U82S works with many
®
®
LE 4