Display Adjustment; The Video On-Screen Display - Lexicon DC-1 V3 Owner's Manual

Version 3 digital controller

Hide thumbs Also See for DC-1 V3:

Quick reference manual (2 pages)

Table Of Contents

Table of Contents

DC-1 Version 3 Digital Controller

Depending on the location of the DC-1 in your room, you may need to adjust

the front panel display for optimum viewing. To adjust this display, press

the

or SELECT buttons on the Remote to enter the Main Menu. Press

twice to select DISPLAY ADJUST.

Press SELECT to highlight the Display Adjust Menu. Press

FRONT PANEL DISPLAY.

To adjust contrast, use SELECT to highlight CONTRAST ADJUSTMENT,

and

to set the contrast of the display to its maximum as seen from

your listening position. Press DONE twice to return to the main menu.

If you want to turn the front panel display off, use SELECT to highlight

STATUS, then use

main menu.

In addition to the front-panel display, the DC-1 contains a character genera-

tor for a video overlay display on monitors. Since the on-screen display is

capable of showing the full menu of options available at any point, calibra-

tion of the system is faster and easier if the DC-1 video output is connected

to a video monitor.

Adjustments to the on-screen display are made from the Display Adjust

menu. To display this menu, press the

Remote to enter the Main Menu. Press

Press SELECT to enter the Display Adjust menu. Press SELECT to open the

On-Screen Display menu.

to select OFF. Press DONE twice to return to the

or SELECT buttons on the

twice to select DISPLAY ADJUST.