Table of Contents
Advertisement
Set Mode Item 47 [ SPLIT ]
Function: Enables/Disables split CTCSS/DCS coding.
Available Values: SPL.OFF/SPL. ON
Default: SPL.OFF
When this Set Mode Item is set to "SPL. ON," you will see the following additional param-
eters after the "DCS" parameter while configuring Set Mode Item 48: SQL.TYP.
D:
DCS Encode only.
T DCS: Encodes a CTCSS tone and Decodes a DCS code.
D TSQL: Encodes a DCS code and Decodes a CTCSS tone.
Select the desired operating mode from the selections shown above.
Set Mode Item 48 [ SQL.TYP ]
Function: Selects the Tone Encoder and/or Decoder mode.
Available Values: OFF/TONE/TSQL/REV TN/DCS
Default: OFF
TONE: CTCSS Encoder
TSQL:
CTCSS Encoder/Decoder
REV TN: Reverse CTCSS Decoder (Mutes receiver when matching tone is received)
DCS:
Digital Coded Encoder/Decoder
Note: See also Set Mode Item 47: SPLIT regarding additional selections available during
"Split Tone" operation.
Set Mode Item 49 [ STEP ]
Function: Setting of the synthesizer steps.
Available Values: 5/10/12.5/15/20/25/50/100 kHz, or AUTO
Default: AUTO (Step automatically changes according to operating frequency.)
Set Mode Item 50 [ TN FRQ ]
Function: Setting of the CTCSS Tone Fre-
quency.
Available Values: 50 standard CTCSS tones
Default: 100.0 Hz
Set Mode Item 51 [ TOT ]
Function: Setting of the TOT time
Available Values: 1MIN - 30MIN or OFF
Default: 6MIN (minutes)
The time-out timer shuts off the transmitter after continuous transmission of the programmed
time.
FT-60R O
M
S
M
CTCSS TONE FREQUENCY ( Hz )
67.0
69.3
71.9
82.5
85.4
88.5
100.0 103.5 107.2
123.0 127.3 131.8 136.5 141.3 146.2
151.4 156.7 159.8 162.2 165.5 167.9
171.3 173.8 177.3 179.9 183.5 186.2
189.9 192.8 196.6 199.5 203.5 206.5
210.7 218.1 225.7 229.1 233.6 241.8
250.3 254.1
–
M
74.4
77.0
79.7
91.5
94.8
97.4
110.9
114.8
118.8
–
–
–
77
Advertisement
Table of Contents
