Frequency Navigation On The Main Band (Vfo-A) - Yaesu PCC-2000 Reference Book

PCC-2000 R
F
REQUENCY
M T D K
AIN UNING IAL NOB
Bring the mouse cursor to the Main Tuning Dial knob, then
turn the mouse scroll to tune the Main Band (VFO-A) fre-
quency.
Press and hold in the left mouse button on the edge of the
Main Tuning Dial knob, then rotate the mouse, to tune the
Main Band (VFO-A) frequency while holding in the left
mouse button.
D F D
IRECT REQUENCY IGIT
1. Click the left mouse button on the frequency digit which you
wish to change on the Main Band (VFO-A) frequency. The
frequency digit will change to Orange.
2. Turn the mouse scroll to tune the frequency digit of the Main
Band (VFO-A) frequency.
B C
AND HANGE
Click the left mouse button on the [ BAND ] button correspond-
ing to the Amateur on which you wish to operate.
D K F
IRECT EYPAD REQUENCY
1. Click the left mouse button on the [ ENT ] button of the BAND
keys. The "VFO SET" window will open.
2. Enter a frequency directly from the BAND keys or computer's
keyboard. Available entry values are 30000 - 60000000 (300
Hz - 60 MHz).
3. Click the left mouse button on the [ OK ] button of the "VFO
SET" window or press the computer's [ ENTER ] key to ter-
minate the frequency entry.
EFERENCE
N
AVIGATION ON THE
S
ET
E
NTRY
- 5 -
B
OOK
( VFO-A )
M B
AIN AND
Main Tuning Dial knob
Frequency Digit
"VFO SET" window
[ OK ] button
BAND keys
[ ENT ] button