Command Send - Yaesu PCC-2000 Reference Book

PCC-2000 R
1. Click the left mouse button on the "Command Send" pa-
rameter in the "File" menu on the "PCC-2000" Personal
Computer Controller to open the "Command Send" pop-up
window.
2. Enter the CAT command you wish send to the FT-2000 with
the PC keyboard.
For example: Set the VFO-A frequency to 14.250000 MHz.
FA14250000;
Refer to a "FT-2000 CAT Operation Reference Book" for
the CAT command.
3. Click the [ OK ] button to send the CAT command to the trans-
ceiver and close the pop-up window.
EFERENCE
C S
OMMAND END
"COMMAND SEND" parameter
- 23 -
B
OOK
"Command Send" window
[ OK ] button