Yaesu FTM-350R - APRS Manual page 27

GPS O
PERATION
The FTM-350R has 16 "point" memories (four channels in each of four groups),
which store the positon (Longitude/Latitude) and the date.
When your vehicle nears one of the "Point" memories, the "Nav" pop-up window
will open for ten seconds even if another page is being displayed.
You may customize the length of time the window opens via Set mode item "H03
NAVI POPUP" in the "NAVI" group. In addition, the "date" may be changed to a
place or name, using the following procedure:
1. Press the [ P LIST ] key to open the "Point" memory list.
2. Rotate the left side [ DIAL ] knob to select the "Point" memory "date" to be
changed.
3. Press the left side [ DIAL ] knob to show the detail data of the "Point" memory.
4. Press the left side [ DIAL ] knob again to enable editing of the stored data.
5. Rotate the left side [ DIAL ] knob to toggle the point alarm function ON/OFF.
When this selection is set to "OFF", the "Nav" pop-up window does not open
even if your vehicle nears that "Point" memory location.
6. Press the [
[ CLR ] key to clear previous data.
7. To enter the desired name, rotate the
left side [ DIAL ] knob to select a
character/number, and press the [
or [ ] key to move the cursor.
8. Press the [ ENT ] key to overwrite the date setting.
9. Press the [ BCK ] key to return to the "GPS" page, and then press the [ NAVI ]
key again to initiate navigation.
When the GPS Antenna Unit is first turned on, it may take several minutes to
complete a fix of your position. This is normal, as the GPS unit is downloding
"almanac" information from the GPS satellites.
FTM-350R O
PERATING
( R
"Point" memory
] key to move the cursor to the "date" area, and then press the
Important Note
M
ANUAL
O
EQUIRES PTIONAL
]
GPS A U
NTENNA
)
NIT
25