Table of Contents
Advertisement
The FTM-350R can display the current Barometric Pressure and relative changes in the
pressure. Furthermore, when an optional FGPS-1 or FGPS-2 GPS Unit isn installed, the
FTM-350R can display the current altitude and relative changes in the altitude.
First, enable the "BARO/ALTI" page, by pressing the [ SET ] key and choosing the "DIS-
PLAY" group. Then select the Set Mode item "C01 DISPLAY SELECT" and set the "BARO/
ALTI" page to ON. Press the [ ESC ] key three times to exit the Set Mode. See page 35.
To display the "Baro/Alti" Page, enablesthe "BARO/ALTI" page via Set Mode item "C01
DISPLAY SELECT" in the group, beforehand. See page 35.
1
Press the [ FWD ] or [ BCK ] key repeatedly, until the "BARO/ALTI" Page appears.
1
The current Barometric Pressure appears at the upper right of the display. A chart that
and indicates the relative changes in the pressure (barometric chart) is presented in the
left half of the display.
Additionally, if you install the optional GPS Unit, your current altitude appears at the
upper right of the display, and your current position (Longitude/Latitude) appears at
the lower right of the display.
Press the [ SCALE ] key to change the time scale of the barometric chart. Available
2
selections are "2H", "6H", "12H", and "24H".
Press the [ ALTI ] key to change the "barometric" chart to the "altitude" chart. You may
3
also change the time scale of the altitude chart by pressing the [ SCALE ] key.
To return to the "barometric" chart, press the [ BARO ] key.
4
To return to the "Radio" page, press the [ FWD ] or [ BCK ] key repeatedly, until the "Radio"
Page appears.
You may change the measurement units of the barometric and altitude, via Set Mode item
"G10 UNIT SELECT" in the "SYSTEM" group (see page 39).
: The FGPS-2 GPS Unit requires CT-133 GPS Antenna Cable and CT-136 GPS An-
tenna Adapter.
FTM-350R O
PERATING
B
/A
ARO
3
2
4
M
ANUAL
P
LTI
AGE
O
PERATION
23
Advertisement
Table of Contents
