Standard Equipment And Specifications - Alamo Industrial Eagle 14 Operator's Manual

Standard Equipment and Specifications

1.
Cutting Width
Transport Width
Overall Width
Overall Lenth
Cutting Height
Hitch
Blade Overlap
Blade Carrier
HP Required(Min.)
Gearbox Rating
Power Divider
Center Wing
Gerabox Limited Warranty
Output Shaft Diameter
Blade Tip Speed:
Center 540 RPM
1000 RPM
Wings 540 RPM
1000 RPM
Cutting Capacity(Max.)
Driveline Size
Main
Wings
Driveline Limited Warranty
Driveline Protection
Deck Thickness
Side Skirts: Replaceable
Replaceable Skid Shoes
Wing Flex
Safety Deflectors
Tractor Static Vertical
Drawbar Load Rating(Min.)
Deck Rings
*Safety Deflectors are standard equipment. Single and double chain guards are available as extra equipment
at extra cost. Alamo Industrial recommends mowers be equipped with deflectors or double chain guards for all
mowing purposes. Single chain guards may be used for agriculture purposes only and are specifically not
recommended for highway, right-of-way, parks or greenbelt mowing.
**Ratings based on actual field performance.
Eagle 20 03/09
© 2009 Alamo Group Inc.
OPERATION
Eagle 20 Eagle 14
240" 162"
115" 106"
248" 170"
216" 216"
2"-14-3/4" 2"-14-3/4"
Pull Pull
6" 6"
Reinforced Pan or Bar
75 HP 80 HP
180 HP
140 HP
5 year
2-3/8"
14,369 FPM
15,062 FPM
16,524 FPM
13,980 FPM
2"
CAT 5 HD
CAT 6 HD
2 Year
Slip Clutch
10 Ga.
1/4"x10-1/2"
Standard Standard
90 Degrees up, 22 Degrees Down
Standard Standard
2650 lbs. * 2600 lbs. *
Standard Standard
Operation Section 4-3
EXTRA EQUIPMENT
Open or Closed Center Three-Spool Valve
Valve Mounting Kit
Ball
Pintle Hitch(Requires Drawbar Modification)
Baffle Kit Assembly
Auxilary Wheels Spindle Kit(For Dual Wheels on
Wings)
Shredding Kit(Bar Carrier Units Only)
OPTIONAL EQUIPMENT
Single or Double Front & Rear Chain Guards
540 or 1000 RPM
Constant Velocity or Non C/V Main Driveline
Pan or Bar Blade Carriers
Laminated, Foam-Filled Used Airplane, Used
Plane, Implement, or Recapped Used Airplane
Tire or Wheel