Tractor Safety Devices; Tractor Horsepower; Drawbar - Alamo Industrial Eagle 14 Operator's Manual

2.2 Tractor Safety Devices

If transporting or operating the tractor and implement near a public roadway, the tractor must be equipped with
proper warning lighting and a Slow Moving Vehicle (SMV) emblem which are clearly visible from the rear of
the unit. Lights and a SMV emblem must be equipped directly on implements if the visibility of the tractor
warning signals are obscured.
Maintain all manufacturer equipped safety shields and guards. Always replace shields and guards that were
removed for access to connect, service, or repair the tractor or implement.
with the PTO master shield missing or in the raised position. OPS-U- 0004

2.3 Tractor Horsepower

The horsepower required to operate the mower depends on several operating factors including the vegetation
to be cut, terrain condition, operator experience, condition of the mower and tractor, and others. For most
mowing conditions, the Eagle 20 and Eagle 14 mower requires a tractor with a minimum of 75 HP. Operating
the mower with a tractor that does not have adequate power may damage the tractor engine.

2.4 Drawbar

The tractor drawbar must be positioned at a certain
length based on the operating speed of the mower
for proper driveline operation. If the mower is a 540
RPM unit, position the drawbar length from shaft end
to hitch hole at 14". For 1000 RPM mowers, set the
drawbar length at 16" for 21 spline 1-3/8" mowers
and at 20" for 1-3/4" 20 spline mowers.
Ensure that the drawbar is rated to carry the tongue
weight of the mower.
Pintle Hook Hitch-Optional Equipment
Drawbar length must be modified
dimension "A" (CV Driveline = 17" ± 2")
Eagle 20 03/09
© 2009 Alamo Group Inc.
OPERATION
to obtain
Operation Section 4-6
Never operate the tractor PTO