Simrad PI44 Operator's Manual page 5

1 Introduction
This section introduces the PI44 catch monitoring system operator manual.
Refer to page 1.
2 System description
This section provides a general introduction to the PI44 catch monitoring
system and the units in use. Refer to page 3.
3 Getting started
This section provides general guidelines to help you get started with the PI44
catch monitoring system. Refer to page 9.
4 Applications
This section gives an overview of the various applications that the PI44 can
offer. Refer to page 25.
5 Display modes
This section gives an in- -depth description of all the display presentations.
Refer to page 32.
6 Operational procedures
This section provides detailed procedures to guide you through the most
common functions. Refer to page 55.
7 Practical use of the sensors
This section describes how to install and use each sensor type. Both PI and PS
sensors are described and explained. Refer to page 103.
8 Sensor chargers
This section describes how to install and use the sensor chargers. Refer to page
164.
9 Menu system
This section allows you to access the reference information from the menu
structure. Refer to page 169.
10 References
This section details the various setup pages, those selected from the menu
system and those accessed from the display presentation. Refer to page 173.
11 PI Configurator
This section explains how to use the PI Configurator utility to change the
sensor's communication channel and update rate. Refer to page 226.
850-165085 / Rev.B
Sections
Operator manual
I