Default Communication Channels And Update Rates; Changing A Communication Channel - Simrad PI DEPTH Instruction Manual

Simrad PI Spread/Depth
14
Default communication channels and
update rates
See the table below for the initial values for the communication
channels and update rates for the various sensors.
Table 1 Default communication channels and update rates
Sensor
PI Bottom Contact
PI Catch
PI Depth (300 m)
PI Depth (600 m)
PI Depth (1000 m)
PI Height
PI Remote/Depth
PI Spread
PI Spread/Depth
PI Twin Spread
PI Temperature
PI SeineSounder

Changing a communication channel

It may be required to change one or more communication
channels, and there may be many reasons for this.
• You have more than one of each sensor. For example, if you
have three temperature sensors, they MUST communicate
on three different channels.
• Other vessels near your use the same PI catch monitoring
system (or a similar), and they have one or more of their
sensors set up to the same communication channels as you
have. This will create interference, as you will "read" each
others sensors.
Com.channel(s)
6
4
16
12
10
14
Depth 300M: 11
Depth 600M: 15
Depth 1000M: 13
2
Depth 300M: 16
Depth 600M: 12
Depth 1000M: 10
Spread: 2
2 and 7
8
Depth 300M: 5
Depth 600M: 9
Depth 1000M: 1
Height: 14
Update rate
Normal
Normal
Fast
Fast
Fast
Fast
Fast
Fast
Fast
Fast
Fast
Fast
315549/A