Maintenance - CONCORD INTENSE - ANNEXE 934 Manual

_ MAINTENANCE

Do not expose the cover to extended periods of sunlight.
While the seat is not in use, cover it or store it in the boot.
Wash the plastic parts in warm soapy water and dry all the
components thoroughly.
The cover can be removed for washing for which you should
follow these instructions:
Casing cover.
Remove the 6 elastic bands and clasps under the edge
of the casing. Pass the clasp that goes between the legs
through the buttonhole. Remove the cover from the tightener
button area and finally undo the Velcro on the central part
and remove the cover upwards.
manual-INTENSE-090313_D-IT.indd 33
Headrest cover.
First remove the cover on the headrest skirt.
Pull the headrest cover off.
• Wash by hand and never above 30ºC.
Follow the same procedure but in reverse to put the cover
back on.
33
13.03.09 09:43