Changing The Position Of The Handle - CONCORD INTENSE - ANNEXE 934 Manual

Changing the position of the handle

The handle has 4 positions, each of which has a specific
function:
Position 1:
Stability, the handle stops it from tipping over when on a
flat surface.
Position 2:
Intermediate position. In this position, the handle is
integrated into the casing.
Position 3:
Carrying. Position for installing and removing the seat in
a CONCORD chassis and for carrying.
Position 4:
AUTO. For car journeys. To change position, press the lever
on the handle (12) and turn the handle until you reach the
desired position.
27
manual-INTENSE-090313_D-IT.indd 27 13.03.09 09:43