Installing The Seat In The Car - CONCORD INTENSE Manual

_ 3 INSTALLING THE SEAT IN THE CAR

The CONCORD INTENSE safety seat must be installed
FACING THE OPPOSITE DIRECTION IN WHICH THE CAR IS
TRAVELLING. Decide on the seat after reading the
"Choosing where to install the safety seat" section.
Fasten the 3-point seat belt.
28
Put the seat on the car seat. Put the handle (08) to the
AUTO position, the most advanced position. The arrow on
both sides of the handle should be pointing to the body of
the casing.
Pass the abdominal part of the car You should pass the part of the car
seat belt through the front slots (01) shoulder strap behind the seat.
on the side of the casing.
If you install the seat with the ISOfix base option (optional) follow the
instructions that you will find on the base.
Tighten that part of the strap and shut
the locking clip (02). Make sure that
the seat is firmly fastened by pulling
on it.
29