General Instructions; Warning; Recommendations - CONCORD INTENSE Manual

Instruction for attachment and use
Hide thumbs Also See for INTENSE:
Table of Contents

Advertisement

_ GENERAL INSTRUCTIONS

You must follow these instructions to ensure that your baby
is adequately protected, comfortable and securely fastened
inside the car:
• Your CONCORD INTENSE safety seat can be installed on
both the front seat, if it is not fitted with an Air-Bag, and
the back seat of the car. In any event, we recommend
that you fit on the back seats. If you position it on the
front seat of the car, this must NOT have an AIR-BAG or it
must be disconnected.
• It is only valid for cars fitted with automatic three-
point fastening seat belts, approved in accordance with
Regulation ECE-16, or other equivalent regulations. Do
NOT use it with a two-point fastening belt.
• Not all safety systems are exactly the same, so we
recommend that you check your CONCORD INTENSE in
the car where you are going to install it.
22
• It is very important that you do not use second-hand
products, as CONCORD can only guarantee complete
safety on items used by their initial buyer.
• CONCORD recommends that you replace your
CONCORD INTENSE safety seat with a new one when it
has undergone violent pressure following an accident.
• Check that all the seat belts are in the correct position
and correctly adjusted to your CONCORD INTENSE.
Ensure that none of the seat belts is coiled up.
• To help your baby grow correctly, we advise that you do
not over-use the safety seat on long journeys, and that
you frequently lay them stretched out in a Moses basket
or bed.

_WARNING

WARNING
• Never leave your baby on their own.
• Any changes or additions to the CONCORD INTENSE
without the correct authorisation from CONCORD may
seriously affect the safety of the restraining system.
• Not following the instructions on how to use the
restraining system may endanger your baby's safety.
• This safety device cannot be used without its cover, or
replaced with one that is not the original, as it is an
integral part of the system's safety features.
• Check that the seat has been positioned correctly.
• Make sure that the seat belt is not trapped between the
folding seats or doors.

_ RECOMMENDATIONS

• Keep this instruction book for future reference.
Always keep it in its compartment under the safety seat.
• Make sure that inside the car, luggage and any other
object likely to cause harm in an accident are correctly
fastened or stored.
• The CONCORD INTENSE safety seat must be fastened
correctly with the seat belts or ISOfix base, even if it is
not in use, as it could be thrown around in an accident
and harm the occupants of the car.
• Remember not to use the CONCORD INTENSE safety
seat in cars fitted with front air-bags, unless they can
be disconnected or deactivated. You will need to check
this with the car manufacturer or seller.
23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the INTENSE and is the answer not in the manual?

Questions and answers

Table of Contents