Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for JRC Radar 1000 MKII
Summarization of Contents
Equipment Overview
System Functionality
Explains the purpose and benefits of the JRC RADAR 1500 MK II LCD system for navigation.
Key Features
Highlights the key operational and technological features of the RADAR 1500 MK II system.
System Components
Lists and identifies the individual components included with the RADAR 1500 MK II system.
Mounting Dimensions
Provides detailed mounting and physical dimensions for the display and scanner units.
Component Names and Functions
Control Panel Layout and Functions
Details the layout and functions of the controls on the JRC RADAR 1500 MK II display unit.
Installation Guide
Unpacking and Inspection
Provides instructions for safely unpacking and inspecting the RADAR 1500 MK II upon receipt.
Installation Planning
Guidelines for selecting optimal locations for scanner and display units for best performance and access.
Display Unit Mounting
Describes conditions and methods for securely mounting the display unit for optimal viewing and operation.
Scanner Unit Mounting
Details the requirements and procedure for securely mounting the scanner unit to a solid surface.
Scanner Unit Cable Connection
Explains how to connect the interunit cable between the scanner and display units.
Electrical Connections
Covers DC power cable connection and external system interface requirements for radar operation.
Initial Operation and Setup
Guides through post-installation checks and initial setup procedures for the radar system.
Radar Operation
Control Layout
Illustrates and describes the location and function of all front panel controls on the radar display.
Powering Radar On and Off
Step-by-step instructions for powering the radar system on, transmitting, and returning to standby.
Tuning Adjustment
Explains how to manually fine-tune the radar receiver for optimal target echo reception.
Sea Clutter Reduction
Provides guidance on using the SEA CLUTTER control to minimize unwanted echoes from waves.
Range Measurement Techniques
Details methods for accurately measuring target distances using range rings and the VRM.
Bearing Measurement Techniques
Explains how to measure target bearings using the bearing scale and the EBL.
Guard Zone Alarm Setup
Describes how to configure the guard zone alarm for intruder detection around the vessel.
Interference Rejection (IR)
Covers the function of Interference Rejection (IR) and when to enable or disable it.
Troubleshooting: Unusual Conditions
Provides procedures for initializing the radar system when encountering operational issues.
Maintenance Procedures
Preventive Maintenance Tips
Offers tips for routine maintenance to ensure long-term, trouble-free operation and prevent failures.
Monthly Cleaning
Provides instructions for cleaning the exterior of the scanner and display units.
Fuse Information
Addresses fuse replacement, noting potential causes for blowing and the correct fuse type.
Technical Specifications
General Specifications
Presents general specifications for the RADAR 1500 MK II, including range, accuracy, and environmental conditions.
Scanner Unit Specifications
Lists detailed technical specifications for the RADAR 1500 MK II scanner unit.
Display Unit Specifications
Provides detailed technical specifications for the RADAR 1500 MK II display unit.
Need help?
Do you have a question about the Radar 1000 MKII and is the answer not in the manual?
Questions and answers