Scanning - Konica Minolta bizhub 181 Quick Manual

4
4 Using the machine as a scanner
4.1

Scanning

If the TWAIN driver is installed on a computer, data scanned with this ma-
chine can be imported onto a computer.
Two operations are available: pull scan, where scanning is started with a
command from the computer, and push scan, where scanning is started by
pressing the [Start] key on the machine.
The following procedure provides descriptions of the pull scan and push
scan operations.
1
Start the application on the computer.
3
4-2
1
Using the machine as a scanner
4
2
bizhub 181