7
Specifying the Setting for "BATCH TX"
If the batch transmission setting (transmission time) is specified for a one-touch dial
key programmed with recipient fax numbers, multiple documents can be stored in
the memory and sent out together at the specified time.
Note
A one-touch dial key must first be programmed with the fax number of the
recipient for the batch transmission.
To set batch transmitting
1
Select the "FAX REGISTRATION".
❍
Refer to "Selecting the "FAX REGISTRATION" menu" on page 7-34.
2
Press the [5] key from the 10-Key
Pad to select "BATCH TX".
3
Press the one-touch dial key
programmed with the recipient
that you wish to send the batch
transmission fax to.
A screen appears, allowing you to
specify the transmission time.
?
Was the one-touch dial key that was pressed one programmed for group
dialing, program dialing, or not registered fax number, or not programmed at
all?
➜
An error message appears.
7-54
7.7 Setting Up the Fax Registration
bizhub 161f