Utility Mode - Konica Minolta bizhub 161f User Manual

7
7.1

Utility Mode

There are fifteen menus in the Utility mode.
No. Name
1 MACHINE SETTING
2 PAPER SOURCE
SETUP
3 USER MANAGEMENT
4 ADMIN.MANAGEMENT
5 COPY SETTING
6 FAX REGISTRATION
7 TX OPERATION
8 RX OPERATION
9 COMM. SETTING
10 REPORTING
11 INITIAL USER DATA
12 NETWORK SETTING
13 E-MAIL SETTING 1
14 E-MAIL SETTING 2
15 SCAN SETTING
7-2
Description
Used to specify settings for the machine's operating environment.
Used to specify the size and type of paper loaded in Tray1. In addition,
auto tray switching can be enabled for each tray.
Used to specify settings after the drum cartridge is replaced.
Used to specify setting for the administrator.
Used to specify the default settings for each copy function.
Used to specify the default setting for each fax function.
Used to specify the default setting for TX operation.
Used to specify the default setting for RX operation.
Used to specify the default setting for communicating environment.
Used to specify the default setting for each report function.
Used to specify setting for the initializing user data.
Available only if the optional Network Interface Card NC-501 is
installed. For details, refer to the User's Guide for the Network
Interface Card NC-501.
Available only if the optional Scanner Unit SU-502 is installed. For
details, refer to the User's Guide for the Scanner Unit SU-502.
7.1 Utility Mode
bizhub 161f