Download Print this page

GTW 01-198 Manual

Deluxe golf bag attachment

Download this manual

01-198

Deluxe Golf Bag Attachment

for GTW Mach3 Deluxe Grab Bar 01-200

INCLUDED:

• Lower Mounting Strap

• 2 Rail Attachments

• Golf Bag Holder

• Hardware Pack

WARNING:

Step 1

Remove nuts and one each of the lock & flat washers

from rail attachment clamps as shown.

Step 2

Insert bolt with clamp into golf bag holder in mounting

holes as shown.

Using a 17mm Wrench, attach holder and rails together

using washer, lock washer, and nut as shown. Tighten

hardware.

Lower

Mounting Strap

Rail Attachments

GTW recommends professional installation. If you choose to not have this product installed by a

professional, we highly recommend that you exercise caution, care, and patience when installing

this product as it involves drilling holes into your cart's body.

Golf Bag Holder

TOOLS NEEDED:

• 17mm Wrench

Need help?

Do you have a question about the 01-198 and is the answer not in the manual?

Page 1 Mounting Strap Rail Attachments Golf Bag Holder GTW recommends professional installation. If you choose to not have this product installed by a WARNING: professional, we highly recommend that you exercise caution, care, and patience when installing this product as it involves drilling holes into your cart’s body.
Page 2 Step 3 A. Loosen threaded knob on bottom of rail clamps and slide Golf bag holder onto rail. B. Tighten rail clamps to rail using threaded knobs in desired location. Step 4 Install lower strap around grab bar and golf bag or bags as needed and secure excess with velcro strap.