Advertisement
Quick Links
Universal Trailer Hitch/ Universal Grab Bar
*If installing a Hitch + Grab Bar skip to Step 3.
1
*If installing a Grab Bar only, skip to Step 6.
Tool Needed: 13mm Socket or Wrench
To install the Hitch only to the Footrest, attach
the supplied 90° Brackets to Hitch using the
inside holes using the 8x25mm hardware.
Bracket should face each other as shown.
If installing this product with a Rear Grab
Bar, skip to Step 3.
2
13mm Socket or Wrench
Using 8x40mm bolts & washers, attach Hitch
to Footrest as shown.
installation instructions
Trailer Hitch
Grab Bar
Advertisement
Related Manuals for GTW 01-208
Summary of Contents for GTW 01-208
- Page 1 Universal Trailer Hitch/ Universal Grab Bar installation instructions Grab Bar Trailer Hitch *If installing a Hitch + Grab Bar skip to Step 3. *If installing a Grab Bar only, skip to Step 6. Tool Needed: 13mm Socket or Wrench To install the Hitch only to the Footrest, attach the supplied 90°...
- Page 2 13mm Socket or Wrench When installing this product with a Rear Grab Bar, you will not use the mounting brackets from Step 1. Attach Hitch to Grab Bar using 4 bolts as shown. Hand tighten bolts until all 4 bolts are in place, then tighten completely.
Need help?
Do you have a question about the 01-208 and is the answer not in the manual?
Questions and answers