Lexmark 5700 - Color Jetprinter User Manual page 42

36
Printing from DOS
6
You can use the printer driver for your Lexmark
5700 Color Jetprinter to change printer settings
that are not in your application. For help, see
"Changing print settings for DOS applications" on
page 33.
7
Print as you normally would from your
application.
Note: When you make changes to the DOS Printing Tab
(Windows 3.1, 3.11, and 95) or DOS Printing
section of the Device Settings Tab (Windows NT
4.0), they apply to DOS print jobs only. When
you make changes on other tabs, they apply to all
print jobs.
Printing from a DOS application to
another printer
Follow these steps when you want to send a DOS print
job to a printer other than your Lexmark Color Jetprinter.
1
Open the printer's
For help opening the Control Program, see
"Opening the Control Program" on page 6.
2
Follow the steps for your operating system:
Windows 95 and Windows 3.1, 3.11:
a
Click the
b
Select the
option.
Windows NT 4.0:
a
Click the
b
Under DOS Printing, click on
ing.
c
From the Change DOS Printing Setting
area, choose Disabled.
3
If prompted, restart Windows.
4
Send a DOS print job to the other printer.
Control Program.
Options Tab.
Disable CJ5700 DOS Printing
Device Settings Tab.
DOS Print-