Way Basics 819767013334 Manual

4 CUBBY
Included
24 Pins
4 Vertical Side zBoards 2 Vertical Middle zBoards
groove on 1 side groove on 2 sides
1 Top zBoard, 1 Bottom zBoard
Groove on 1 side
1 Middle zBoard
Groove on 2 sides
4 Backboards
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
Important
CAUTION placing unit on its side or back
will compromise structural integrity. Use
right side up.
Help and Comments www.waybasics.com/contact
• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
1
Carefully remove the 3M
protective layer from adhesive
(adhesive shown in yellow).
5 6
Align middle horizontal zBoard
(has grooves on top and
bottom) and press down firmly.
2
Place alignment pins
in vertical zBoards.
Align vertical middle 7
zBoard to horizontal zBoard
and press down firmly.
Insert backboards into
grooves.
• When moving your Way Basics unit, lift from the bottom
• Indoor use only. Not in bathroom.
3 4
Align vertical middle
zBoard to horizontal zBoard
and press down firmly.
Insert backboards into
grooves.
Align vertical side zBoards 8 Align top horizontal zBoard to unit
with grooves facing the and press down firmly.
backboard.
Enjoy building possibilities!
Align vertical side zBoards with
grooves facing the backboard.
version 042017