Way Basics DOUBLE CUBE Assembly Manual

DOUBLE CUBE
Included
16 Pins 4 Vertical zBoards
adhesive strips on 2 edges
2 Backer Boards 2 Horizontal zBoards
thin and has no adhesive with groove on 1 side
1 Middle zBoard
with grooves on 2 sides
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
Important
Tip Start assembly from bottom to top.
DO NOT place unit on its side or back as
it will compromise its structural integrity.
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
1
Fit backboard into horizontal
zBoard groove.
5 Align vertical zBoard
to backboard.
Help and Comments www.waybasics.com/help
2
Carefully remove the 3M
protective layer from adhesive.
6 7
Align middle zBoard.
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry
3 4
Place alignment pins Arrange vertical zBoard with
in vertical zBoards.
grooves facing backboard
as shown.
8
Repeat steps 1 - 5 for next tier.
Share and Win www.waybasics.com/share
Align horizontal zBoard and
press firmly to secure unit
together. Visit links below
for more details.
Enjoy building possibilities!