2 SHELF BOOKCASE
Included
16 Pins
1 Top zBoard, 1 Bottom zBoard
groove on 1 side
1 Middle zBoard
groove on 2 sides
4 Vertical zBoards
adhesive strip on top and bottom
2 Backboards
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
Important
CAUTION placing unit on its side or back
will compromise structural integrity. Use
right side up.
Help and Comments www.waybasics.com/contact
• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
Carefully remove the protective layer
1
leaving the 3M adhesive on zBoard
(adhesive shown in yellow).
Align middle board on top as shown.
4
Press down firmly.
• When moving your Way Basics unit, lift from the bottom
• Indoor use only. Not in bathroom.
2
Insert alignment pins in vertical zBoards.
Repeat steps 1 - 3 to add second tier.
5
Fit backboard into horizontal zBoard
3
groove. With grooves facing backboard,
align side zBoards onto bottom zBoard.
Press down firmly.
Align top zBoard onto unit and press
6
down firmly.
Enjoy building possibilities!
version 042017
Need help?
Do you have a question about the Webster 819767013419 and is the answer not in the manual?
Questions and answers