Way Basics 819767012696 Manual

2-SHELF STORAGE
Included
32 Pins
2 Horizontal zBoards -
top and bottom
holes on one side only
4 Vertical zBoards
adhesive strips on 2 edges
of each zBoard
2 Backer Boards
adhesives strips on 2 edges
1 Middle zBoard
holes on top and bottom
WARNING: CHOCKING HAZARD
Small parts NOT for children under 3 years
Contact Us www.waybasics.com/contact
• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
Carefully remove the 3M
1
protective layer from adhesive.
4 Align the vertical zBoards and
backboard to the holes in the middle
zBoard. Align horiozontal zBoard and
press firmly to secure unit together.
• Do not place unit on its side or back as it will compromise it's structural intergrity
• Indoor use only. Not in bathroom
Place alignment pins in
2
vertical zBoards and backboard.
5
When moving the unit, first empty
contents. Lift the cube from the bottom
zBoard to keep adhesives intact.
Start with the bottom horizontal
3
zBoard. Align the vertical zBoards
and backboard to holes in the
horizontal zBoard. Align middle
zBoard.
6
Enjoy building possibilities!
version 1220