Advertisement
Quick Links
Thank You!
What's
Included
Connect
With Us
Thank you for choosing Way Basics! With your help, Way Basics products are helping protect the environment. No
new trees were cut down to create our furniture, because it's made from recycled paper. At the end of its long life we
hope you'll find other uses for our zBoards or simply recycle – then they might eventually find their way back to Way
Basics where we'll make them into new zBoards!
Dowel x16
Vertical zBoard x2
Screws x6
Drilling Template x1
Backboard x1
Wall Attachment x2
(with metal fitting)
talktous@waybasics.com
Horizontal zBoard x2
Glue x1
Plastic Anchor x6
Turn this page over to get started!
Share Your Photos and Win
www.waybasics.com/share
Hook bracket guide
(28.5 x 28.5 cm)
Hook bracket guide
(50 x 28.5 cm)
Advertisement
Related Manuals for Way Basics Wall Cube
Summary of Contents for Way Basics Wall Cube
- Page 1 Thank You! Thank you for choosing Way Basics! With your help, Way Basics products are helping protect the environment. No new trees were cut down to create our furniture, because it’s made from recycled paper. At the end of its long life we hope you’ll find other uses for our zBoards or simply recycle –...
- Page 2 Images below are for the Wall Cube. The Wall Rectangle is the same process Apply glue into the pre-drilled holes and insert Remove protective strips Assemble the horizontal zBoards dowels into horizontal zBoards and backboard. horizontal zBoards and backboard. backboard.Notice that the metal fitting needs to be on the back.
Need help?
Do you have a question about the Wall Cube and is the answer not in the manual?
Questions and answers