AVS Ventvisor 94255 Installation Instructions Manual

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents - 2 Piece Set
Front Driver
Side Visor
Contents - 4 Piece Set
Front Driver
Side Visor
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Clean the trim where the visor will mount with
1
Installation Instructions
Ventvisor
NOTE: Actual product may vary from illustration.
Front Passenger
Front Passenger
Side Visor
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
an alcohol pad.
Deflector
®
Side Visor
Rear Driver Rear Passenger
Side Visor Side Visor
Clean Towel
Remove the tape liner from the front and rear flange.
Peel back 2" (5cm) of tape liner from each end of
rear
flange
2
Page 1 of 2
I - Sheet Number VV11 Rev.A
Alcohol Pad x2
Alcohol Pad x4
top flange.
top flange
front flange
free end